1. Alcohol Breath Detector

(2 Model)

1. Deluxe

(Features)

-Accuracy is very high as ultra-modern MEMS gas sensor was used with re-calibration function in it.
-With simple one-touch operation and LCD screen, we can easily confirm the measured value even in a dark place.
-Its design is small and quality looking and it is very handy to carry.
-Measured value for alcohol is displayed in 3 type, thus % BAC or % BAC & g/l or mg/l unit on LCD screen.
-Before and after measuring, beep sound signifies the measuring action to measuring person.
- Battery lasts longer than other products.

(What is MEMS ? )

MEMS is Micro Electro Mechanical System meaning technology for micro semiconductor processing.
This technology is to integrate electric and mechanical parts into micro small size one
and MEMS means to fabricate a system with new function by combining mechanical structure
and electric structure of micro scale together.

(Specification)

Certification: CE approved
Power Source: 2 AAA Size Battery
Method: MEMS Gas Sensor
Display Format: LED Display (Display with 13 step from 0.00% to 0.12%)
External Dimension: 90 × 30 × 16.5mm
Weight: about 43g (Including Dry Cell)
Temperature in use: 0 ℃ ∼ 35 ℃
Storage temperature: 0 ℃ ∼ 70 ℃
Material: Main case - ABS resin

(How to use)

Before using this product, please make sure that you do re-calibration.

(How to measure)

In the case of using the value obtained after measuring 2~3 times, more accurate result will be obtained.

2. Drive 2

(Features)

-The smallest personal alcohol detector in the world!
- As this product uses MEMS gas sensor and is equipped with re-calibration function, accuracy is very high.
-Determine Blood Alcohol Content in seconds!
- LED Indicator for 5 Levels of Blood Alcohol Concentration
(Green, Yellow, Orange, Red-bright & Red-dark)

(Specification)

Certification: CE approved
Auto Calibration by Power on
Method: MEMS Gas Sensor
Low Power Consumption (1 Li Battery -LR2032 > 150 times)
LED for 5 Levels of BAC%
Size: 4.3 x 2.5 x 0.85cm
Weight: 10.5g (including battery)

2. Bad Breath Detector

(Features)

-It is LED display method.
-It use MEMS gas sensor.
-Accuracy is very high as it is equipped with re-calibration function.
-Be more confident.
-Eliminate embarrassing situations.
-Preliminary self-diagnosis for health issues.

(Specification)

-Certification: CE approved
-Auto Calibration by Power on
-Low Power Consumption (1 Li Battery -LR2032 > 150 times)
-Perfect for accessories & gift
-LED for 5 Levels of BAC%
-Size: 4.3 x 2.5 x 0.85cm
-Weight: 10.5g (including battery)

(Detectable odors)

Cavity, Cigarette scent, Food scent, Hyperacidity, Caused by diabetes & Caused by an internal disease.

(How to measure)

1. Push the button for 2 to 3 seconds
(LED lights flick several times by turns. You can use the device when only the green LED light turns on.)

2. Blow your normal breath at the 2 to 3 cm distance from the air inlet as if you make sound 'hoo~'.

3. After moment, the degree of bad breathing will appear through the LED.
(The LED turns off automatically after 10 seconds)

It detects the specific gases from your teeth or stomach
and shows 5 levels of mouth smell in different colors of LED display.
( 5 levels ---> Green: Good, Yellow: Average, Orange: Maybe, Red1: Poor & Red2: Bad)

3. Gas Detector

(Features)

-Gas Detector detects gases such as LPG and LNG.
-When gas leakage is detected, the unit makes beep sound together with LED light
and therefore we can prevent gas explosion accident.
- We can prevent dangerous gas explosion in advance.
- There are two kinds of Gas Detectors available, thus Stick type to be conveniently used at home
and Waist attachment type which can be used at construction sites.
-Gas Check is equipped with automatic calibration function.

(Specification)

Power: 2AA battery
Sensor type : MEMS Gas Sensor
Product size : 220 x 30mm
Weight : 84.5g (including 2AA Batteries)
Display : LED Display, 3 signals (Green, Yellow & Red)
Operating time: Over 40 Hours

(How to measure)

1 . Push the button, the main switch, which placed in the middle of gas detector,
then the gas detector will be turned on with buzzer alarm.
2 . Green, yellow, and red light blink at an interval of 0.5 seconds until the internal gas sensor stabilized.
The light blinks in the order of green, yellow, red, yellow, and green.
3 . If the gas sensor stabilized, green light is turned on with buzzer alarm.
This means that the gas detector is ready for gas detecting.
4 . Put the tip of gas detector to the suspicious places of gas leakage when the detector is ready.
5 . If gas detected, the detector displays yellow or red light with buzzer alarm.
Yellow light is turned on when there is a little gas. And red light is turned on when there is a lot of gas.
6 . Whenever user push the main switch, the gas detector is turned off.